wholesale door lock latch locking for business for Van

Product Feature

◆ Suitable carriage height: The height of the carriage is more than 1.5m.
◆ Suitable carriage temperature: Normal temperature.
◆ Handle type: "-" shaped handle.
◆ Lock head / lock seat technology: Forging /casting.
◆ Lock nose design technology: Reserve the lock core hole position.
◆ Installation: Bolting.

wholesale door lock latch locking for business for Van-1

Product Display

wholesale door lock latch locking for business for Van-2

wholesale door lock latch locking for business for Van-3

wholesale door lock latch locking for business for Van-4

wholesale door lock latch locking for business for Van-5

Welding Lock Bar Recommendations

wholesale door lock latch locking for business for Van-6

1) To confirm the distance between the top and bottom frame lock block center distance.
2) Are fixed on a flat surface based on size and lock after.
3) To ensure that the height size, respectively fixed frame, to ensure that the center of the products are highly consistent.
4) According to the length of the tail and locks the height to the length of the weld pipes under.
5) Spot welding pipe and locks, up and down two locks respectively and spot welding pipe.
6) remove the tube and spot welding of locks, confirm the lock rod with two locks all the verticality, after.
7) On the shelf two Y type rotary burn, welding.

Remind

wholesale door lock latch locking for business for Van-7

Remind

The hole height is between 1500MM and 2500MM, you can refer to this door lock!
Due to different measurement methods, the measurement error is allowed between 5MM and 30MM.
Due to the different colors displayed by different computers, the actual colors of products may be slightly different from the above images, which are affected by physical objects. Thank you for your understanding.

Door Locking Gear Series

Part No.	Part Name	Quantity	Part No.	Part Name	Quantity
011011-In	Keeper	2	011017.1-In	Hand Hub	1
011022-In	Cam	2	011017-In	Handle Rivet	1
011023-In/24-In	Large Bearing Bracket	2	011018-In	Retainer Catch	1
011015-In/16-In	Small Bearing Bracket	1	011001-In(Optional)	Tube ∮27 x 2.5	1