bar lock Φ27 manufacturers for Vehicle

Product Feature

◆ Suitable carriage height: The height of the carriage is more than 1.5m.
◆ Suitable carriage temperature: Normal temperature.
◆ Handle type: "-" shaped handle.
◆ Lock head / lock seat technology: Forging /casting.
◆ Lock nose design technology: Reserve the lock core hole position.
◆ Installation: Bolting.

bar lock Φ27 manufacturers for Vehicle-1

Product Display

bar lock Φ27 manufacturers for Vehicle-2

bar lock Φ27 manufacturers for Vehicle-3

bar lock Φ27 manufacturers for Vehicle-4

bar lock Φ27 manufacturers for Vehicle-5

Welding Lock Bar Recommendations

bar lock Φ27 manufacturers for Vehicle-6

1) To confirm the distance between the top and bottom frame lock block center distance.
2) Are fixed on a flat surface based on size and lock after.
3) To ensure that the height size, respectively fixed frame, to ensure that the center of the products are highly consistent.
4) According to the length of the tail and locks the height to the length of the weld pipes under.
5) Spot welding pipe and locks, up and down two locks respectively and spot welding pipe.
6) remove the tube and spot welding of locks, confirm the lock rod with two locks all the verticality, after.
7) On the shelf two Y type rotary burn, welding.

Remind

bar lock Φ27 manufacturers for Vehicle-7

Remind

The hole height is between 1500MM and 2500MM, you can refer to this door lock!
Due to different measurement methods, the measurement error is allowed between 5MM and 30MM.
Due to the different colors displayed by different computers, the actual colors of products may be slightly different from the above images, which are affected by physical objects. Thank you for your understanding.

Door Locking Gear Series

Part No.	Part Name	Quantity	Part No.	Part Name	Quantity
011011-In	Keeper	2	011017.1-In	Hand Hub	1
011022-In	Cam	2	011017-In	Handle Rivet	1
011023-In/24-In	Large Bearing Bracket	2	011018-In	Retainer Catch	1
011015-In/16-In	Small Bearing Bracket	1	011001-In(Optional)	Tube ∮27 x 2.5	1

Product Details

bar lock Φ27 manufacturers for Vehicle-8

bar lock Φ27 manufacturers for Vehicle-9

bar lock Φ27 manufacturers for Vehicle-10

bar lock Φ27 manufacturers for Vehicle-11

Product Application

bar lock Φ27 manufacturers for Vehicle-12

bar lock Φ27 manufacturers for Vehicle-13

bar lock Φ27 manufacturers for Vehicle-14

bar lock Φ27 manufacturers for Vehicle-15

l******e

TBF bar lock has undergone many laboratory tests prior to mass production, such as dimensional stability at high temperatures, bridge deformation and lens retention, lens size, thickness and curvature. The advantages of the injection molding method are fast production speed and high efficiency

z******q

TBF bar lock meets the quality and safety requirements of our destination market, as well as all applicable international standards. It has passed a flammability-resistance test, a corrosion-resistance test, and other durability tests. Reduce risk, and change products in real time and at low cost according to market demand

t******y

TBF bar lock undergoes electrical safety tests. These tests cover an electrical testing, high current bond test, insulation test, leakage current test, and load test. Operations can be automated

g******y

The quality check for TBF bar lock is strictly carried out. It will be inspected by machines or by visual mainly in terms of board thickness, flatness, warping degree, veneer's paint film, etc. More complex parts can be designed

v******b

The quality control for TBF bar lock is required to carry out thoroughly. Before packaging, it will be checked to make sure no impurities are included, and it will be packaged with thick corrugated paper to protect the four corners. Operations can be automated

g******n

This product has superior performance, making them compatible and versatile for the industry. More complex parts can be designed

Product Message

*Name

Phone

*E-mail

*Content